描述:日本SMC先導式電磁閥出線方式電樞的特殊結構,在通過內置全波整流器類型給出在關的改進響應由所吸收的表面提供間隙
日本SMC先導式電磁閥出線方式
流體的動態粘度必須不過50
2 / s以下。
電樞的特殊結構,在通過
內置全波整流器類型給出在關的改進
響應由所吸收的表面提供間隙
當它被接通。
選擇直流規范。或交流規范。內置全波整流器
型時的動態粘度比水高或
當OFF反應被先。
日本SMC先導式電磁閥出線方式
The dynamic viscosity of the fluid must not exceed 50
mm2/s.
The special construction of the armature adopted in the
built-in full-wave rectifier type gives an improvement in OFF
response by providing clearance on the absorbed surface
when it is switched ON.
Select the DC spec. or AC spec. built-in full-wave rectifier
type when the dynamic viscosity is higher than water or
when the OFF response is prioritized.